T24-RM1 | Wireless Receiver | Relay Output | 16 Inputs

T24-RM1 Wireless Relay Output Receiver
Price: $563.00
  • Accepts up to 16 inputs from T24 wireless transmitters and triggers a range of selectable output actions
  • 2 x 240 Vac 5 A relay module for control & alarms
  • Configurable latching, inversion and hysteresis
  • Simple configuration and calibration
  • Relay operation modes (triggering based on sum of modules, any individual module or difference between low and high values of modules)
  • Surface mounting enclosure waterproof to IP67

This wireless receiver with relay output offers dual power relays capable of mains power switching. Each relay can be configured as high, low or window alarms and can be associated with a group of up to eight T24 transmitters.

Relays can operate when the sum of the assigned transmitter modules reach a set-point or when any of the modules reach the set-point. There is also a mode where the difference between the lowest and highest value is compared to the set-point. The T24-RDC is ideal for applications where you are looking for a group of weights to be within a certain band. i.e. balancing four corners of a weigh scale or a hanging truss.

Relays can be latched and a digital input or external command can be used to reset them. An alarm/error signal relay is operated if communication is lost or other selectable errors occur and this alarm resets once the source of the alarm or error is removed.

The license free 2.4GHz direct sequence spread spectrum (DSSS) radio technology offers high integrity, error free communications which can co-exist with other wireless technologies such as Wi-Fi, Bluetooth® and Zigbee®. FCC, ETSI and IC approvals.

The wireless receiver with relay output is configured using free T24 Toolkit software which runs on a PC connected to a T24 base station and is supplied in an IP67 sealed ABS case but a DIN rail option is available

Internal antenna offers up to 800 m (2,600 ft) range in an open field site.

T24-RM1 Dimensions

Documents

Software

  • T24 Toolkit : Version 2.4.8 This toolkit allows configuration, calibration and testing of the T24 range of 2.4GHz telemetry products.
Q: How do I configure the T24-RM1 device?

A: Using the free T24 Toolkit software. This runs on a PC connected to a T24 base station. 

Loading...