The industrial wireless telemetry base station T24-BSi can be used for the configuration of all of the T24 modules which is greatly simplified by the T24 Toolkit software for Windows & supplied free of charge. Data can also be captured by the wireless base station from an unlimited number of T24 transmitter modules & streamed to a PC to function as a radio telemetry data logger.
The options of USB, RS232 or RS485 interfaces enables this wireless telemetry base station to connect to a wide range of devices such as PCs, PLCs, OEM hardware etc. The internal PCB antenna provides up to 800 m (2,600 ft) range.
For software developers a standard Windows DLL and COM driver are available to enable data collection from T24 transmitter modules.
The license free 2.4 GHz direct sequence spread spectrum (DSSS) radio telemetry technology offers high integrity, error free communications which can co-exist with other wireless technologies such as Wi-Fi, Bluetooth® and Zigbee®. ETSI, FCC and IC approvals.
*Maximum range achieved in open field site at height of 3 meters (9.8 feet) above ground
A: With the use of the .DLL and COM driver provided with the T24 Tool Kit, users can create tunnelling between the data provided by the base station, to the PC, and another communication protocols.
A: No. Once a transmitter module has been configured it will remain stable for its lifetime providing its operating limits are not exceeded.
A: Both provide users with a PC interface by which collect data from any transmitter module with in range and configure all devices in the T24 range.
A: The industrial base station provides not only USB interface but also RS232 and RS485 at multiple baud rates. This module can also be DIN rail mounted.
A: Each base station can use one of 16 channels. From that selected channel a base station can collect data simultaneously from any number transmitter modules depending upon the frequency of readings being provided by the transmitter module.
A: The T24-SO gathers data from up to 8 transmitter modules and, on its serial output, provides a user configurable ASCII string. The output string can contain the summed value of the gathered data. This output can be used to drive serial displays, printers or to simply feed directly into a PC, PLC or other data transmitter systems.
The base stations communicate bi-directionally so are used to configure the devices as well as gather data. The communications protocol is binary and packet based and so requires processing to present the data to the application in a formatted manner.
A: Transmitter modules are not controlled when providing data, rather data is provided at a user determined rate during configuration set up. The base station can gather data from any number of transmitter modules providing they are on the same channel. The number of modules a single base station can process depends upon the frequency of transmission from the transmitter modules that channel.