T24-LD1 | Large LED Display | Wireless

T24-LD1
Price: $1,350.00
  • 100 mm (4") character format
  • Wired logic Inputs allow control of tare and net/gross toggle functions
  • Units conversion using output scaling e.g. kgs to lbs
  • Simple wireless configuration and calibration
  • Transmits on license free 2.4 GHz with up to 800 m (2,600 ft) range
  • Suitable for crane or weighing applications
The T24 wireless telemetry range is a flexible telemetry system designed to provide high accuracy measurement data from a wide range of sensor outputs. To complement the transmitter modules there are devices that allow the building of telemetry systems, these include displays, printers, relay modules, analogue outputs and serial output devices.

The T24-LD1 is one of several display options within the T24 range. The T24-LD1 provides the user with a large format four-digit display capable of displaying the summed value of up to eight T24 wireless telemetry acquisition devices.

The wireless telemetry large LED display is configured to operate wirelessly using a 2.4 Ghz Worldwide licence exempt radio frequency with a maximum range of up to 800 meters.

The T24-LD1 only requires the connection of a 11-30 VDC power supply (not supplied).

The unit conforms to IP65 / NEMA4.

Using the PC based T24-Toolkit software and T24 USB Base Station the user can quickly and easily select and configure the transmitter devices to be summed on the T24-LD1. The T24 Toolkit also provides advanced user control over the wireless aspects of the system as well as a ‘System Zero’ function.

Further wired Logic Inputs allow the user to remotely control Tare and Net/Gross toggle functions.

*Maximum range achieved in open field site at height of 3 metres (9.8 feet) above ground.

T24-LD1 Dimensions

Documents

Software

  • T24 Toolkit : Version 2.4.8 This toolkit allows configuration, calibration and testing of the T24 range of 2.4GHz telemetry products.
Q: Is the display waterproof?

 A: The display is water resistant to IP65 / NEMA 4 (the product must be mounted on a vertical surface).

Q: What sort of power supply is required?

A: The display requires an external DC power supply rated at 11 – 30V DC and capable of supplying 3.5 Amps. 

Q: Is the display affected by bright sunlight?

 A: In situations where this may be an issue the provision of a suitable cowl to shade the display will remove the problem.

Q: Is the brightness adjustable?

A: No

Q: Is the display power supply input reverse polarity protected?

A: Yes

Loading...