UAB | Universal Input DIgital Conditioner and Controller

UAB | Universal Input DIgital Conditioner and Controller

  • Digital set-up and calibration using handheld plug-in display / keypad or comms
  • Optional local or remote LCD display and keypad
  • Fully isolated 4-20 mA and 0-10 V analog outputs
  • Wide range of plug-in input modules providing transducer excitation
  • High accuracy and high stability over a wide temperature range
  • Set-points and event handling using digital inputs and 2 x SPCO relays

The UAB universal input digital signal conditioner & controller is a very flexible digital signal conditioning system. Presented in an OEM modular PCB format, for use with a wide range of sensors and transducers, including volts, amps, temperature, frequency, speed, load, force, pressure, torque, LVDT, RVDT and many more.

The digital architecture of the UAB offers very easy one-pass calibration and fast setup.

This digital signal conditioning amplifier offers options of local or remote LCD display, isolated analogue outputs, latching relays or digital outputs for control or alarm functions.

The RS232 or RS485 options provide for digital communications (including setup) and can support label or ticket printers.
Customize your UAB: Multiple Option Groups Below

UAB Specs
UAB Dimensions

Documents

Software

  • Instrument Explorer : Version 2 build 2.0a This software allows the user to quickly set up and start to use the digitisers and indicators that Mantracourt offers. Capabilities include event monitoring and data logging, as well as calibration and configuration.
Q: What is the maximum power rating for a full UAB rack?

A: 100 Watts

Tech. Tip: Hover and Click on any of the icons below.
Universal Input Digital Signal Conditioner and Controller-BASE Unit - See all option groups below to select the options necessary for your application.
Universal Input Digital Signal Conditioner and Controller
Power Supply Options
The LS1 power supply is a ‘plug in’ module supplying 110 Volts AC at 50/60 Hz or 220/240 Volts AC at 50/60 Hz. A maximum power rating of 10 Watts is available, with this module. The running current for each amplifier is between 250 and 480 milliamps dependent upon module configuration, with a start up current of 3 Amps for 20 milliseconds. Earthing (or shield)- If the amplifier is not earthed elsewhere, an earth should be made to the screen (SC) of the 15 way connector.

The LS3 power supply is a 'plug in' module supplying 9 to 30 Volts DC. Similar in characteristics to the LS1 with regard to power and current ratings. The module is not reverse polarity protected and will require similar protection at installation. TheLS3 module should be protected on installation by an in line fuse.

Power Suppy Module-None Selected
AC Power Supply 110/220 Volt or 220/230 Volt DC
DC Power Supply 9-32 Volt DC
Display Option- You must make a selection from the Display Group below unless you plan to use the RS485 Communication Option.
Display Module-None Selected
On Board Programmer
Remote Handheld Programmer
Handheld Programmer for High Resolution Modules
Relay Output Option
Relay Output Module-None Selected
Relay Output Module 2 Set-Points (2x SPCO 5.0 amp 240-volt AC)
UAB Communication Options- You must select the LC3 Option below unless you have made a selection from the Display Group Above.
UAB Communication Module-None Selected
RS485/RS232 Commuinication supports ASCII and MantraBus
20mA Current Loop for MODBUS, RTU, ASCII and MantaBus
Input Modules
UAB Input Module-None Selected
UAB Input Module 0-10 Volts
UAB Input Module 0-20mA
LVDT Input
Temperature Type K
Temperature Type J
Temperature PT100
Temperature Rate/Totaliser
Mounting Enclosure Option
Enclosure-None Selected
Die Cast IP65 Case with Die Cast Lid 220 x 120 x 80mm
Stainless Steel IP65 Case with Stainless Steel Lid 220 x 160 x 90 mm
DIN Rail Mounting Fixture
Case and DIN Rail Mounting for DSJ4, LCA, UAB, JBA
Accessories- Multiple Selection Possible Check one or more of the accessories below need for your application.
Transparent Plastic Case Lid
ABS IP65 Case with Plain ABS Lid 200 x 120 x 75mm
  • UAB-Universal Input Digital Signal Conditioner and Controller
  • Power Suppy Module-None Selected
  • Display Module -None Selected
  • Relay Output Module-None Selected
  • UAB Communication Module-None Selected
  • UAB Input Module-None Selected
  • Enclosure-None Selected
$203.00
$203.00
Loading...