TGU-4550-SPK | Tinytag Ultra 2 | Thermocouple Starter Pack

The TGU-4550 supports four types of thermocouple sensor - K, J, T and N - offering cost-effective and fast response Temperature monitoring from -270 to +1370°C (-454 to 2498°F) depending on the type used. It also has a built-in temperature sensor (-40 to +85°C) (-40 to +185°F) allowing simultaneous monitoring of process and ambient temperatures. The connector supports standard and miniature thermocouple plugs. This unit is supplied with a Type K Thermocouple (-100 to +250°C).

Understanding Calibration

During calibration data loggers are compared to a reference meter that has been calibrated in a UKAS (United Kingdom Accreditation Service) approved laboratory. Data Loggers for use with a probe are calibrated with the accompanying probe. The certificate lists the value recorded by the reference meter (the temperature or humidity at which the data logger was tested), the value recorded by the data logger and the error between the two readings (the certificate will also show readings before and after any adjustment made to the unit where appropriate). In addition to the reading information, calibration certificates also list the test method and the details of the equipment used to provide traceability back to national standards.

Calibration certificates do not have a period of validity; they are simply a statement of what the unit was reading when it was tested. That said, unless the application is particularly critical or demanding, most people get their loggers calibrated annually.

Even if you don't purchase calibration certificates, we guarantee that our loggers will meet the accuracy figures specified on our datasheets at the point of purchase.

Calibration Points

Our standard calibration points, which are used unless otherwise specified, are:
• Temperature: 0 and 30°C
• Humidity: 20 and 80 % RH (at 25°C)

These points have been chosen to give good coverage for general purpose use, but should other points be required we can calibrate units within the following ranges:
• Temperature: -20 to +150 °C
• Humidity: 20 to 90 % RH (at 25°C)

Calibration Points

Our standard calibration points, which are used unless otherwise specified, are:
• Temperature: 0 and 30°C
• Humidity: 20 and 80 % RH (at 25°C)

These points have been chosen to give good coverage for general purpose use, but should other points be required we can calibrate units within the following ranges:
• Temperature: -20 to +150 °C
• Humidity: 20 to 90 % RH (at 25°C)

Enter Data into this field if you selected a Calibration with Extra Point(s).