Your shopping cart is currently empty.
PSDS-HSBK | Portable Strain Sensor Display
Price: $335.00
- High resolution ADC providing sensitivity of between 7.5 mV/V to 480 mV/V. (3.3 VDC Excitation)
- Strain bridge connector for six wire connection plus TEDS support
- Two-point calibration via the keypad or comprehensive calibration options via the toolkit.
- Ergonomic design with improved grip and shock protection
- Simple keypad configuration or fully customized via toolkit software
- 128 x 64 dot matrix display with backlight
- USB port providing configuration, calibration, save & restore, live logging
- Measurement rate up to 2,400 SPS
The PSDS-HSBK allows simple display of strain bridge-based measurements such as load cells and pressure gauges with sensitivity up to +/-480 mV/V
Up to six calibration ranges are available allowing for different loading modes (tension and compression) or different sensors. Each calibration range will remember settings that contribute to the user experience such as selected units and tare values
TEDS devices using templates 33, 40 and 41 can be connected and will update the viewed calibration.
Up to six display modes available. These determine what is visible on the LCD display and what actions are available from the set of three soft keys.
Full configuration is available with a free PC based toolkit. Some simple configurations such as two-point calibration is available from within the handheld using the menu system.
This module can be either used as a handheld device or, using the optional mounting accessories, or attached to equipment, dashboards, walls or desks.
The PSD is powered by two internal non-rechargeable AA alkaline batteries.
What's in the Box: PSDS-HSBK-A
Additionally, you will need a mating connector, we have two part numbers available:
427-739 Mating Connector for
use with 4.0 to 6.0mm cable.
427-741 Mating Connector for use with 6.0 to 8.0mm cable.
ACC-CB-A PSDS USB Right Angle Cable (Required for use with Tool-Kit Software)
You can add these items using the links below or at checkout.
| STRAIN GAUGE MEASUREMENT | |||||
|---|---|---|---|---|---|
| Parameter | Min | Typical | Max | Units | Notes |
| Measurement Method | 6-WIRE | Note: Can accept 4 wire Input | |||
| Excitation Voltage | 3.2 | 3.3 | 3.4 | VDC | |
| Drive Capability | 85 | 10,000 | Ohm | ||
| Sensitivity FSR Ranges ¹ | ±7.5 | ±480 | mV/V | ||
| Linearity ² | ±2 | ppm/FSR | In High Quality Operating Mode | ||
| Offset Temperature Stability | 12 | nV/°C | |||
| Internal Resolution | 24 | Bit | |||
| Resolution at 1 SPS | 1,100,000 (20) | Counts (bit) | |||
| Resolution at 10 SPS | 550,000 (19) | Counts (bit) | |||
| Resolution at 2400 SPS | 6,500 (14.3) | Counts (bit) | |||
| 1 - Effective sensitivity from ±0.5mV/V with reduced resolution | |||||
| 2 - Linearity error can be further reduced by device linearization calibration | |||||
| ELECTRICAL, MECHANICAL & ENVIRONMENTAL | |||||
| Parameter | Min | Typical | Max | Units | Notes |
| Display Resolution | 128 x 64 | Pixels | |||
| Buzzer Acoustic Output | 45 | dB | |||
| Power Supply ³ | 2x AA (LRx or USB Powered | ||||
| Power Consumption | 35 | mA | Measurement Operation | ||
| Standby Current | 75 | uA | |||
| Battery Life Low Quality 1Hz | 220 | Hours | |||
| Battery Life High Quality 1200 Hz | 60 | Hours | |||
| Operating Temperature Range | -10 | 50 | °C | ||
| Storage Temperature Range | -20 | 80 | °C | ||
| Operating Humidity Range | 0 | 95 | %RH | ||
| Environmental Protection | IP64 (With connector mated or unmated) | ||||
| External Dimensions | L: 170mm, W: 94mm, H: 42mm | Excluding Mating Connector | |||
| Weight | 365 | Grams | Including Batteries | ||
| 3 - Use Enegizer L91 3000mAh Cells | |||||
Q; What is required for Operation of the PSDS-HSBK
A. The PSDS-HSBK requires the following for operation.
Additionally you will need a mating connector, we have two part numbers available:
427-739 Mating Connector for use with 4.0 to 6.0mm cable.
427-741 Mating Connector for use with 6.0 to8.0mm cable.
ACC-CB-A PSDS USB Right Angle Cable (Required for use with Tool-Kit Software)
Q: Can I use the handheld to indicate different engineering units?
A. Yes, KILOGRAMS, GRAMS, TONNES, POUNDS, OUNCES, KILO-POUNDS
More FAQ'S will be added here in the future. For all specifications and operations please refer to the manual and data sheets.
Required Items and Optional Accessories...